In a bit of a rush

Does this remind you of anything? It's cotton which I will be making into an oven glove, hopefully with better insulation properties than my current one which lets heat through far too fast for my liking. I just wove a long strip of plain weave using the same rustic type of cotton for both warp and weft. I need to get some binding and then I'll put it together.

I really wanted to make something that used some twill patterning, so I made YAS (yet another scarf). I threaded two 10 dpi heddles in a 3 2 1 3 2 1 threading which worked out at 15 epi. I'll elaborate about the threading another time,'cos I don't have the time right now. I explored the weave drafts at Handweaving.net and found two which worked for me. I used one for about 10" at each end of the scarf and a second for the middle section. The pattern at the ends (no. 62700) was very different on each side, while the other (no. 34910) was the same on each side.


This shows the transition from one pattern to the next, the ribbon was my length guide, because I needed to know when to start the ending pattern. The yarn is 80% acrylic, 20% wool 4 ply from the machine knit stash. The finished scarf is 20cm wide and 1.82m long. On the loom it was 19cm and 2m. I always thought that woven fabric decreased in width when finished, but not mine, well not all of it. I tried twisted fringe for the first time - my poor fingers. I need to get a fringe twister if I'm going to do more of this. I love the effect though.

In knitting news, I've finished one all knit (no purls) Monkey sock, and started the second. These really are going quite fast for me. I've started another Cabled Spiral sweater because I really like the yoke, but this one has ribs for the cuffs and body. So far I have both sleeves done to the armpit and about 4" of the body completed.

I've just started weaving YAS using Wendy Happy bamboo yarn for warp, plain weave with a 3 ply wool weft. Pretty. I'll try to get some photos taken soon.

Decision making

For the last few days, the only thing I've knitted has been a sock. This is 72 sts on a 2.5mm Addi lace needle in a 4+2 garter rib pattern, using the hand dyed sock yarn left over from my Mystic Meadows shawl.

I've been trying to find the perfect sweater project since I finished two sweaters nearly at the same time recently. I've been looking through books and magazines and Ravelry, and I think I've narrowed it down to two. This could change at any time though. The next thing is to swatch and see if I like the fabric in the yarns I'm thinking of using, one is handspun alpaca and the other is a wool rich DK.

Other than that, I've been playing with a peg loom I made. This is just the trial version of it, I've got a lovely piece of oak for the real thing, but I wanted to try out the spacing of the pegs first.

I started out with strips of the carded fibre that has a lot of noils and neps which makes a lovely squishy fabric, and then I lightly spun some of the same and tried that. I think I might try felting the result. It could be a good way to use up some of the not so good fibre I have. I fancy trying to make a rug at some point.

I managed to get a mirror shot of the Cabled Spiral sweater, the colour is a little yellowed, but it shows the fit pretty well. This is a very cosy garment, the Sirdar Salsa (merino and acrylic) is very soft and not at all itchy.

I'm still here

It's been a while I know, but progress has been made. My Rosemary sweater is finished, and so is the Cabled Spiral sweater. I'm happy with them both. I added some rows of single crochet rib to the neckline of the Rosemary sweater and overlapped them in the middle in an effort to stop the gaping. This worked well and it sits nicely. The colour is more accurate in the first picture, a dark olive green.

This picture is of the almost complete Cabled Spiral. Now it has a slightly longer neckband and is ready for blocking. The pattern is written for a polo neck, but I always find them too warm, so I've shortened it, hopefully without spoiling the finished look. Modifications I made: added more garter ridges on the hem to counteract the tendency to roll. Also, I did just a little waist shaping, just visible in the picture.

This is a blocking picture of the yoke, the colour is more accurate in the whole sweater picture.

Now I have to decide what to make next. I only have one sock going at the moment and I just discovered an error in it which I'm hoping I can fix without ripping out more than 2". It is knitted with the green hand dyed sock yarn left over from Mystic Meadows, and I'm using a garter rib pattern.

Spinning without a plan

It would help if I could decide what I wanted to use the resultant yarn for when I set out to do some spinning. Sometimes, though it is better to see how the fibre behaves spun thick or thin and take it from there. It's no fun battling with it, much better to go along with it. These English wool tops fall into this category being better suited to a fairly thick single.

This is 225m of 3 ply weighing 158g. There is also a small amount of 2 ply in the same colours and 135m of 2 ply in the heather colourway weighing 80g.

I still have the same amount to do again from the last dyeing session, the red and green. I'm not getting a very even result with this yarn, but hopefully it will look okay knitted up.

The cabled spiral sweater is progressing, I'm up to the yoke now - picture next time when there will be cables.

Morning Surf finished

It's done and blocked, measuring 55" x 7". I didn't stretch it very much, so it could have been bigger, but I'm pleased with it. It didn't even take me very long to knit, it's nice to have something finished quickly for a change.

The photo is of just one sleeve, but as of this evening, there is another one as well. Next I'll cast on for the body of the Cabled Spiral sweater by Norah Gaughan. I ripped the yarn (Sirdar Salsa) from the Weekend Sweater which had been hibernating for some time, and which I eventually realized was a bit small and I didn't really want a tight fitting sweater. The Cabled Spiral is mainly stocking stitch until the yoke when it gets interesting.

This is the current state of the crocheted Rosemary sweater, the longer sleeve needs a few more rounds, and then I need to make the other one match. I need to work out a way to make the neck opening less revealing because I don't want to have to wear a camisole underneath necessarily. I had made the opening higher than the pattern stated, but it wasn't quite enough even then.

I had a little dyeing session at the weekend, this is about 500g of english wool tops which I dyed in four different semi solid shades. So far, I've spun up about 2oz of the brown. At the moment , the plan is to make a 3 ply with it, maybe for a hat. Other ideas include spinning a thick singles yarn for a change.

The brown was dyed using leftover unexhausted dyes from previous sessions, after all, brown is usually the result of mixing all sorts of colours isn't it? There was separation of some of the constituent shades, giving this mixture shown clearly in the predrafted tops.